We've updated our
Privacy Policy effective December 15. Please read our updated Privacy Policy and tap

Study Guides > Mathematics for the Liberal Arts

Measures of Variation

Consider these three sets of quiz scores: Section A: 5 5 5 5 5 5 5 5 5 5 Section B: 0 0 0 0 0 10 10 10 10 10 Section C: 4 4 4 5 5 5 5 6 6 6 All three of these sets of data have a mean of 5 and median of 5, yet the sets of scores are clearly quite different. In section A, everyone had the same score; in section B half the class got no points and the other half got a perfect score, assuming this was a 10-point quiz.  Section C was not as consistent as section A, but not as widely varied as section B. In addition to the mean and median, which are measures of the "typical" or "middle" value, we also need a measure of how "spread out" or varied each data set is. There are several ways to measure this "spread" of the data. The first is the simplest and is called the range.

Range

The range is the difference between the maximum value and the minimum value of the data set.

Example 23

Using the quiz scores from above, For section A, the range is 0 since both maximum and minimum are 5 and 5 – 5 = 0 For section B, the range is 10 since 10 – 0 = 10 For section C, the range is 2 since 6 – 4 = 2 In the last example, the range seems to be revealing how spread out the data is. However, suppose we add a fourth section, Section D, with scores 0 5 5 5 5 5 5 5 5 10. This section also has a mean and median of 5. The range is 10, yet this data set is quite different than Section B. To better illuminate the differences, we’ll have to turn to more sophisticated measures of variation.

Standard deviation

The standard deviation is a measure of variation based on measuring how far each data value deviates, or is different, from the mean. A few important characteristics:
  • Standard deviation is always positive. Standard deviation will be zero if all the data values are equal, and will get larger as the data spreads out.
  • Standard deviation has the same units as the original data.
  • Standard deviation, like the mean, can be highly influenced by outliers.
Using the data from section D, we could compute for each data value the difference between the data value and the mean:
data value deviation: data value - mean
0 0-5 = -5
5 5-5 = 0
5 5-5 = 0
5 5-5 = 0
5 5-5 = 0
5 5-5 = 0
5 5-5 = 0
5 5-5 = 0
5 5-5 = 0
10 10-5 = 5
We would like to get an idea of the "average" deviation from the mean, but if we find the average of the values in the second column the negative and positive values cancel each other out (this will always happen), so to prevent this we square every value in the second column:
data value deviation: data value - mean deviation squared
0 0-5 = -5 (-5)2 = 25
5 5-5 = 0 02 = 0
5 5-5 = 0 02 = 0
5 5-5 = 0 02 = 0
5 5-5 = 0 02 = 0
5 5-5 = 0 02 = 0
5 5-5 = 0 02 = 0
5 5-5 = 0 02 = 0
5 5-5 = 0 02 = 0
10 10-5 = 5 (5)2 = 25
We then add the squared deviations up to get 25 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 25 = 50.  Ordinarily we would then divide by the number of scores, n, (in this case, 10) to find the mean of the deviations.  But we only do this if the data set represents a population; if the data set represents a sample (as it almost always does), we instead divide by n - 1 (in this case,  10 - 1 = 9).[footnote]The reason we do this is highly technical, but we can see how it might be useful by considering the case of a small sample from a population that contains an outlier, which would increase the average deviation: the outlier very likely won't be included in the sample, so the mean deviation of the sample would underestimate the mean deviation of the population; thus we divide by a slightly smaller number to get a slightly bigger average deviation.[/footnote] So in our example, we would have 50/10 = 5 if section D represents a population and 50/9 = about 5.56 if section D represents a sample.  These values (5 and 5.56) are called, respectively, the population variance and the sample variance for section D. Variance can be a useful statistical concept, but note that the units of variance in this instance would be points-squared since we squared all of the deviations.  What are points-squared?  Good question.  We would rather deal with the units we started with (points in this case), so to convert back we take the square root and get: [latex-display]\begin{align}&\text{populationstandarddeviation}=\sqrt{\frac{50}{10}}=\sqrt{5}\approx2.2\\&\text{or}\\&\text{samplestandarddeviation}=\sqrt{\frac{50}{9}}\approx2.4\\\end{align}[/latex-display] If we are unsure whether the data set is a sample or a population, we will usually assume it is a sample, and we will round answers to one more decimal place than the original data, as we have done above.

To compute standard deviation:

1.     Find the deviation of each data from the mean. In other words, subtract the mean from the data value. 2.     Square each deviation. 3.     Add the squared deviations. 4.     Divide by n, the number of data values, if the data represents a whole population; divide by n – 1 if the data is from a sample. 5.     Compute the square root of the result.

Example 24

Computing the standard deviation for Section B above, we first calculate that the mean is 5. Using a table can help keep track of your computations for the standard deviation:
data value deviation: data value - mean deviation squared
0 0-5 = -5 (-5)2 = 25
0 0-5 = -5 (-5)2 = 25
0 0-5 = -5 (-5)2 = 25
0 0-5 = -5 (-5)2 = 25
0 0-5 = -5 (-5)2 = 25
10 10-5 = 5 (5)2 = 25
10 10-5 = 5 (5)2 = 25
10 10-5 = 5 (5)2 = 25
10 10-5 = 5 (5)2 = 25
10 10-5 = 5 (5)2 = 25
Assuming this data represents a population, we will add the squared deviations, divide by 10, the number of data values, and compute the square root: [latex-display]\sqrt{\frac{25+25+25+25+25+25+25+25+25+25}{10}}=\sqrt{\frac{250}{10}}=5[/latex-display] Notice that the standard deviation of this data set is much larger than that of section D since the data in this set is more spread out. For comparison, the standard deviations of all four sections are:
Section A: 5 5 5 5 5 5 5 5 5 5 Standard deviation: 0
Section B: 0 0 0 0 0 10 10 10 10 10 Standard deviation: 5
Section C: 4 4 4 5 5 5 5 6 6 6 Standard deviation: 0.8
Section D: 0 5 5 5 5 5 5 5 5 10 Standard deviation: 2.2

Try it Now 7

The price of a jar of peanut butter at 5 stores were: $3.29, $3.59, $3.79, $3.75, and $3.99. Find the standard deviation of the prices. Where standard deviation is a measure of variation based on the mean, quartiles are based on the median.

Quartiles

Quartiles are values that divide the data in quarters. The first quartile (Q1) is the value so that 25% of the data values are below it; the third quartile (Q3) is the value so that 75% of the data values are below it. You may have guessed that the second quartile is the same as the median, since the median is the value so that 50% of the data values are below it. This divides the data into quarters; 25% of the data is between the minimum and Q1, 25% is between Q1 and the median, 25% is between the median and Q3, and 25% is between Q3 and the maximum value
While quartiles are not a 1-number summary of variation like standard deviation, the quartiles are used with the median, minimum, and maximum values to form a 5 number summary of the data.

Five number summary

The five number summary takes this form: Minimum, Q1, Median, Q3, Maximum
To find the first quartile, we need to find the data value so that 25% of the data is below it. If n is the number of data values, we compute a locator by finding 25% of n. If this locator is a decimal value, we round up, and find the data value in that position. If the locator is a whole number, we find the mean of the data value in that position and the next data value. This is identical to the process we used to find the median, except we use 25% of the data values rather than half the data values as the locator.

To find the first quartile, Q1

Begin by ordering the data from smallest to largest Compute the locator: L = 0.25n If L is a decimal value: Round up to L+ Use the data value in the L+th position If L is a whole number:        Find the mean of the data values in the Lth and L+1th positions.

To find the third quartile, Q3

Use the same procedure as for Q1, but with locator: L = 0.75n Examples should help make this clearer.

Example 25

Suppose we have measured 9 females and their heights (in inches), sorted from smallest to largest are: 59 60 62 64 66 67 69 70 72 To find the first quartile we first compute the locator: 25% of 9 is L = 0.25(9) = 2.25. Since this value is not a whole number, we round up to 3. The first quartile will be the third data value: 62 inches. To find the third quartile, we again compute the locator: 75% of 9 is 0.75(9) = 6.75. Since this value is not a whole number, we round up to 7. The third quartile will be the seventh data value: 69 inches.

Example 26

Suppose we had measured 8 females and their heights (in inches), sorted from smallest to largest are: 59 60 62 64 66 67 69 70 To find the first quartile we first compute the locator: 25% of 8 is L = 0.25(8) = 2. Since this value is a whole number, we will find the mean of the 2nd and 3rd data values: (60+62)/2 = 61, so the first quartile is 61 inches. The third quartile is computed similarly, using 75% instead of 25%. L = 0.75(8) = 6. This is a whole number, so we will find the mean of the 6th and 7th data values: (67+69)/2 = 68, so Q3 is 68. Note that the median could be computed the same way, using 50%. The 5-number summary combines the first and third quartile with the minimum, median, and maximum values.

Example 27

For the 9 female sample, the median is 66, the minimum is 59, and the maximum is 72. The 5 number summary is: 59, 62, 66, 69, 72. For the 8 female sample, the median is 65, the minimum is 59, and the maximum is 70, so the 5 number summary would be: 59, 61, 65, 68, 70.

Example 28

Returning to our quiz score data. In each case, the first quartile locator is 0.25(10) = 2.5, so the first quartile will be the 3rd data value, and the third quartile will be the 8th data value. Creating the five-number summaries:
Section and data 5-number summary
Section A: 5 5 5 5 5 5 5 5 5 5 5, 5, 5, 5, 5
Section B: 0 0 0 0 0 10 10 10 10 10 0, 0, 5, 10, 10
Section C: 4 4 4 5 5 5 5 6 6 6 4, 4, 5, 6, 6
Section D: 0 5 5 5 5 5 5 5 5 10 0, 5, 5, 5, 10
Of course, with a relatively small data set, finding a five-number summary is a bit silly, since the summary contains almost as many values as the original data.

Try it Now 8

The total cost of textbooks for the term was collected from 36 students. Find the 5 number summary of this data. $140    $160    $160    $165    $180    $220    $235    $240    $250    $260    $280    $285 $285    $285    $290    $300    $300    $305    $310    $310    $315    $315    $320    $320 $330    $340    $345    $350    $355    $360    $360    $380    $395    $420    $460    $460

Example 29

Returning to the household income data from earlier, create the five-number summary.
Income (thousands of dollars) Frequency
15 6
20 8
25 11
30 17
35 19
40 20
45 12
50 7
By adding the frequencies, we can see there are 100 data values represented in the table. In Example 20, we found the median was $35 thousand. We can see in the table that the minimum income is $15 thousand, and the maximum is $50 thousand. To find Q1, we calculate the locator: L = 0.25(100) = 25. This is a whole number, so Q1 will be the mean of the 25th and 26th data values. Counting up in the data as we did before, There are 6 data values of $15, so                  Values 1 to 6 are $15 thousand The next 8 data values are $20, so                  Values 7 to (6+8)=14 are $20 thousand The next 11 data values are $25, so                Values 15 to (14+11)=25 are $25 thousand The next 17 data values are $30, so                Values 26 to (25+17)=42 are $30 thousand The 25th data value is $25 thousand, and the 26th data value is $30 thousand, so Q1 will be the mean of these: (25 + 30)/2 = $27.5 thousand. To find Q3, we calculate the locator: L = 0.75(100) = 75. This is a whole number, so Q3 will be the mean of the 75th and 76th data values. Continuing our counting from earlier, The next 19 data values are $35, so                Values 43 to (42+19)=61 are $35 thousand The next 20 data values are $40, so                Values 61 to (61+20)=81 are $40 thousand Both the 75th and 76th data values lie in this group, so Q3 will be $40 thousand. Putting these values together into a five-number summary, we get: 15, 27.5, 35, 40, 50 Note that the 5 number summary divides the data into four intervals, each of which will contain about 25% of the data. In the previous example, that means about 25% of households have income between $40 thousand and $50 thousand. For visualizing data, there is a graphical representation of a 5-number summary called a box plot, or box and whisker graph.

Box plot

A box plot is a graphical representation of a five-number summary.
To create a box plot, a number line is first drawn. A box is drawn from the first quartile to the third quartile, and a line is drawn through the box at the median. “Whiskers” are extended out to the minimum and maximum values.

Example 30

The box plot below is based on the 9 female height data with 5 number summary: 59, 62, 66, 69, 72. 5numbersummary

Example 31

The box plot below is based on the household income data with 5 number summary: 5numbersummary-2 15, 27.5, 35, 40, 50

Try it Now 9

Create a boxplot based on the textbook price data from the last Try it Now. Box plots are particularly useful for comparing data from two populations.

Example 32

The box plot of service times for two fast-food restaurants is shown below. store1store2 While store 2 had a slightly shorter median service time (2.1 minutes vs. 2.3 minutes), store 2 is less consistent, with a wider spread of the data. At store 1, 75% of customers were served within 2.9 minutes, while at store 2, 75% of customers were served within 5.7 minutes. Which store should you go to in a hurry?   That depends upon your opinions about luck – 25% of customers at store 2 had to wait between 5.7 and 9.6 minutes.

Example 33

The boxplot below is based on the birth weights of infants with severe idiopathic respiratory distress syndrome (SIRDS)[footnote]van Vliet, P.K. and Gupta, J.M. (1973) Sodium bicarbonate in idiopathic respiratory distress syndrome. Arch. Disease in Childhood, 48, 249–255.   As quoted on http://openlearn.open.ac.uk/mod/oucontent/view.php?id=398296§ion=1.1.3[/footnote].   The boxplot is separated to show the birth weights of infants who survived and those that did not. Comparing the two groups, the boxplot reveals that the birth weights of the infants that died appear to be, overall, smaller than the weights of infants that survived. In fact, we can see that the median birth weight of infants that survived is the same as the third quartile of the infants that died. Similarly, we can see that the first quartile of the survivors is larger than the median weight of those that died, meaning that over 75% of the survivors had a birth weight larger than the median birth weight of those that died. Looking at the maximum value for those that died and the third quartile of the survivors, we can see that over 25% of the survivors had birth weights higher than the heaviest infant that died. The box plot gives us a quick, albeit informal, way to determine that birth weight is quite likely linked to survival of infants with SIRDS. surviveddied

Try it Now Answers

  1. historyexamguideshistoryexamgrades
  2. While the pie chart accurately depicts the relative size of the people agreeing with each candidate, the chart is confusing, since usually percents on a pie chart represent the percentage of the pie the slice represents.
  3. Using a class intervals of size 55, we can group our data into six intervals:
Cost interval Frequency
$140-194 5
$195-249 3
$250-304 9
$305-359 12
$360-414 4
$415-469 3
We can use the frequency distribution to generate the histogram
    1. Adding the prices and dividing by 5 we get the mean price: $3.682
    2. First we put the data in order: $3.29, $3.59, $3.75, $3.79, $3.99. Since there are an odd number of data, the median will be the middle value, $3.75.
    3. There are 23 ratings.
      1. The mean is [latex]\frac{1\cdot4+2\cdot8+3\cdot7+4\cdot3+5\cdot1}{23}[/latex] ≈ 2.5
      2. There are 23 data values, so the median will be the 12th data value. Ratings of 1 are the first 4 values, while a rating of 2 are the next 8 values, so the 12th value will be a rating of 2. The median is 2.
      3. The mode is the most frequent rating. The mode rating is 2.
    4. Earlier we found the mean of the data was $3.682.
      data value deviation: data value - mean deviation squared
      3.29 3.29 – 3.682 = -0.391 0.153664
      3.59 3.59 – 3.682 = -0.092 0.008464
      3.79 3.79 – 3.682 = 0.108 0.011664
      3.75 3.75 – 3.682 = 0.068 0.004624
      3.99 3.99 – 3.682 = 0.308 0.094864
      This data is from a sample, so we will add the squared deviations, divide by 4, the number of data values minus 1, and compute the square root:[latex]\sqrt{\frac{0.153664+0.008464+0.011664+0.004624+0.094864}{4}}\approx[/latex]$0.261
    5. The data is already in order, so we don’t need to sort it first.The minimum value is $140 and the maximum is $460.There are 36 data values so n = 36. n/2 = 18, which is a whole number, so the median is the mean of the 18th and 19th data values, $305 and $310. The median is $307.50. To find the first quartile, we calculate the locator, L = 0.25(36) = 9. Since this is a whole number, we know Q1 is the mean of the 9th and 10th data values, $250 and $260. Q1 = $255. To find the third quartile, we calculate the locator, L = 0.75(36) = 27. Since this is a whole number, we know Q3 is the mean of the 27th and 28th data values, $345 and $350. Q3 = $347.50. The 5 number summary of this data is: $140, $255, $307.50, $347.50, $460
    6. Boxplot of textbook costs
 

Licenses & Attributions

CC licensed content, Shared previously

  • Math in Society. Authored by: Open Textbook Store, Transition Math Project, and the Open Course Library. Located at: http://www.opentextbookstore.com/mathinsociety/. License: CC BY-SA: Attribution-ShareAlike.